Minot · Ward County
SELL SURPLUS WIRE IN MINOT, ND
Minot loads from two directions. Rail takes the heavy freight on one side of town, truck freight takes everything else, and a business that ships both ways tends to keep wire around longer than it should. Buying in larger lots is part of the same habit, and larger lots are where overstock starts.
That shows up as pallets in a back room. Service feeders pulled for a lighting retrofit that got scaled back, tray cable from a shop addition, control cable from a conveyor change, and cartons of THHN that were bought for a job that finished early. Sellers in Minot describe the pallet and we work from there.
Rail, yard and terminal material
Rail-adjacent work uses cable in long runs and heavy sizes. Tray cable and TC-ER for the buildings, copper feeder for the service, and control cable where anything moves on a schedule. When a run gets shortened, the cut piece is usually still on a reel.
A cut piece is not a problem. It is a reel with a known remainder. Give us the footage off the counter and the size off the tag, and we can review it the same day you send it. If the counter is broken or the tag is missing, a wrap count plus the drum diameter gets you close enough for a first look.
Cold-climate commercial work
Heating loads here are real, and heat trace and unit heater circuits mean branch wiring in quantities a southern contractor would not recognize. Most of it is THHN and MC in #12 and #10, and most of the surplus is short. Heat trace cable is ordered by the foot and installed by the circuit, so a part reel is normal here rather than unusual.
Short lengths of MC are worth collecting if you keep them sorted. One shelf, one size per pile, and a photo is enough to start. Tossed together with old cord and broken pieces, they are not worth a pickup, and a sorted shelf is worth a message.
Wire and cable we buy from Minot sellers
- Copper service feeder in #2 to 4/0
- Tray cable and TC-ER
- Control cable from conveyor and door work
- THHN and THWN in #12 and #10
- MC cable in cut lengths
- Heat trace and low-voltage control cable
Loading and freight from Minot
Freight leaves Minot on US-2 or US-83, and both routes take a standard trailer without much trouble. Palletized cartons usually go LTL, while drums go flatbed with a tarp. Tell us the dock height if there is one, since a liftgate adds time to the pickup.
Nearby communities we also cover
We buy surplus wire from sellers in Minot and across Central North Dakota. There is no office or yard in Minot — material is reviewed from your details and photos, and pickup or shipping is arranged for each load.
Request a purchase quote
Send the wire details. Get a real conversation.
Photos and a few specs are enough to start. We will come back with questions or pricing, then agree on pickup or shipping.
Wire sitting in Minot?
Send the reel count and a photo of the tags. If it loads with a forklift, say so — it changes the plan.