Dickinson · Stark County
SELL SURPLUS WIRE AND CABLE IN DICKINSON, ND
Dickinson sits between the oilfield and the shops that serve it, so the wire here is a mix rather than one story. Medium-voltage runs from pad and plant work on one pallet, welding leads and control cable on the next. Knowing which pallet is which saves a trip for everybody.
Stark County work has a manufacturing side too, and manufacturing leaves its own kind of surplus: tray cable from a machine relocation, THHN from a lighting change, VFD cable from a drive that got replaced. Sellers in Dickinson send us all of it, usually with the reel tags still wired to the flange.
Medium voltage from pad and plant work
A 15kV EPR cable that has been unrolled and re-reeled is not factory fresh, but it is still a cable worth quoting. Look at the jacket for scuffs, check the shield at the cutback, and read the tag. If the tag is gone, measure the conductor and give us the overall diameter. Print on MV cable fades faster than print on building wire, so read it in shade with the drum turned to catch the light.
Concentric neutral cable is common in this part of the state, and the neutral wires are the first thing to get damaged in handling. Count them and note any that are broken or missing, since that changes how the whole reel is reviewed.
Shop material and drive cable
VFD cable is a specific construction: three conductors, a ground, and a shield that has to stay continuous to do its job. If the cable was pulled off a drive, say how much shield is left at each end and whether the drain wire survived. A shield that was cut back at a termination cannot be restored, so a pulled VFD cable is usually a shorter usable length than the coil suggests.
The rest is ordinary. Tray cable, THHN, SOOW cord from a portable tool, control cable from a panel. Box it by type, tag what you know, and photograph what you do not. A sharp photo of a jacket legend settles most questions before anyone drives out. If two people disagree about a size, the photograph settles it.
Wire and cable we buy from Dickinson sellers
- 15kV EPR cable with copper shield
- Concentric neutral MV cable
- VFD cable with continuous shield
- Tray cable and TC-ER
- Welding cable in 1/0 and 2/0
- Control cable from panel work
Loading and freight from Dickinson
Dickinson loads on I-94, which keeps flatbed freight simple in both directions. Reels go on a flatbed or a step deck, cartons go LTL, and a yard with a forklift makes either one easy. Give us the drum count and an approximate weight per drum.
Nearby communities we also cover
We buy surplus wire from sellers in Dickinson and across Western North Dakota. There is no office or yard in Dickinson — material is reviewed from your details and photos, and pickup or shipping is arranged for each load.
Request a purchase quote
Send the wire details. Get a real conversation.
Photos and a few specs are enough to start. We will come back with questions or pricing, then agree on pickup or shipping.
Wire sitting in Dickinson?
Send the reel count and a photo of the tags. If it loads with a forklift, say so — it changes the plan.