Surplus electrical wire and cable purchasing across North Dakota

Talk to a buyer (614) 715-3047

Lincoln · Burleigh County

WE BUY SHOP AND SERVICE WIRE FROM SELLERS IN LINCOLN, ND

A shop building on an acreage outside Lincoln gets wired once, and whatever is left over is whatever the supplier would not take back. That usually means a part reel, a coil, and a box of odd cut lengths in the corner of the shop.

County
Burleigh County
ZIP codes
58504
Highways
US-83
Region
Central North Dakota

Most of what comes out of Lincoln comes from a garage or a barn rather than a warehouse. The material is honest but it needs describing: a reel of #2 URD with the last fifty feet cut off, a coil of #6 bare copper used for grounding, THHN in three colors from a subpanel. Nothing exotic, and all of it usable.

Service laterals and shop subpanels

A shop subpanel takes SER or a buried feeder, and the buried feeder is where the leftover comes from. Direct-burial aluminum in 2/0 and 4/0 is bought by the foot and sold by the reel, so the arithmetic rarely lands on zero. The tag on the flange says what the full length was, which makes the remainder easy to state.

Inside the shop, the wire is THHN in conduit, mostly #12 and #10 with a few #8 runs for a welder or a compressor circuit. If the conduit is already in the wall, the wire that came out of it is short. Say so and give the lengths.

Well circuits and outbuildings

Submersible pump cable comes in flat and round constructions, and the flat style gets cut close to the wellhead. A coil of three-wire pump cable with a ground is the sort of thing that sits on a shelf for years. Gauge and conductor count are enough to start with. The ground conductor is often one size smaller than the hot legs, which is worth confirming before you quote a gauge.

Outbuildings run on UF and on low-voltage cable for gates and lighting. Low-voltage is small material, but a full spool is still a full spool. Group it by type and send one photo of the whole shelf. A length of UF that has been in a barn for a decade will have a jacket stiff enough to crack when it bends. Test a bend before you photograph it.

Wire and cable we buy from Lincoln sellers

  • URD aluminum in 2/0 and 4/0
  • SER for subpanel feeders
  • Submersible pump cable, flat and round
  • UF direct-burial cable
  • THHN in #12, #10 and #8
  • Low-voltage cable for gates and lighting

Loading and freight from Lincoln

Lincoln loads from driveways, so coils and single reels are the usual shape of a pickup. We buy from sellers along US-83, which is the route out, and a liftgate trailer handles most of it. Tell us if a reel has to be rolled down a barn aisle rather than lifted at a dock.

Nearby communities we also cover

We buy surplus wire from sellers in Lincoln and across Central North Dakota. There is no office or yard in Lincoln — material is reviewed from your details and photos, and pickup or shipping is arranged for each load.

Request a purchase quote

Send the wire details. Get a real conversation.

Photos and a few specs are enough to start. We will come back with questions or pricing, then agree on pickup or shipping.

1. Who is selling
2. Where the wire is

North Dakota locations only. Tell us where the material physically sits, not where your office is.

3. What the wire is
4. Condition, packaging and access
5. Photos
Up to 10 MB total across all photos. Wide shots of the whole lot plus close-ups of reel tags and printed jacket markings move a quote along fastest. Photos are optional — send them later by email if the files are large.

Submitting sends your details and photos to saleselectricalbuyers@gmail.com. We review the material and reply with questions or a pricing conversation. Sending a request does not commit you to sell and does not guarantee a purchase.

Wire sitting in Lincoln?

Send the reel count and a photo of the tags. If it loads with a forklift, say so — it changes the plan.

Request a quote
Call now (614) 715-3047 Request a quote